|
|
Post by Quendil on Aug 20, 2021 8:56:15 GMT
From facebook   |
|
|
|
Post by Quendil on Aug 20, 2021 8:56:44 GMT
Personally I'm not a fan of either turret as they look too modern for the hull
|
|
|
|
Post by boxholder on Aug 20, 2021 12:20:01 GMT
I think that riveted polyhedral turrets would be more in keeping with the rest of the vehicle.
In any case, the single gun turret is more likely to be feasible since the gun crew needs room to work. Unless these are machinegun turrets.
My $0.02
|
|
|
|
Post by digid on Aug 20, 2021 14:12:24 GMT
Agree Turret is way too modern, and too small for the era. Needs rivets to match rest of unit and would be much larger if not for MG's
Also not a fan of the embossed logo on the side of the tank. Does not match the era either. Almost looks 40kish
|
|
jmccarroll
Assault Tripod
" The only good Martian, is a dead Martian "
Posts: 323
Send PM
|
Post by jmccarroll on Aug 20, 2021 23:12:53 GMT
The case mates below are for MGs or Cannons?
If MGs then two barrel turret. If cannons than a single barrel.
Always wondered why the US and Brit land ships only had a single barrel when warships had two or more to a turret.
|
|
|
|
Post by David N.Tanner 07011959 on Aug 20, 2021 23:43:37 GMT
the actual K-Wagen looks better
|
|
|
|
Post by boxholder on Aug 21, 2021 12:12:24 GMT
A few minutes with a sanding stick or block will get rid of the logo. Just wear a dust mask - the resin dust is really irritating.
|
|
|
|
Post by David N.Tanner 07011959 on Aug 21, 2021 17:03:52 GMT
|
|
