|
Post by farkongnome on Nov 7, 2016 22:33:39 GMT
Ok, I finally got 2 of the 3 boxes of AQMF loot from the guy I bought it from, and as I'm sorting it out, I have questions... Gratuitous shot of my loot: I'm going to assume that these piece are part of the mine layer: Which are US and which are BEF (I'm guessing the topmost figures are BEF): That's all I have for now.... I'm sure I'll have questions about how to assemble the guns, the Wicket Tank, Two Lb Coil Gun, etc as I get to build them...
|
|
|
Help!!
Nov 7, 2016 23:07:45 GMT
Post by scottwashburn on Nov 7, 2016 23:07:45 GMT
Yes, I'd guess the top figures are BEF. They don't look my US figures (the bottom ones do). And the other pieces are for a mine layer. You need a plastic Steam Tank for the rest of it.
|
|
|
Help!!
Nov 7, 2016 23:19:38 GMT
Post by farkongnome on Nov 7, 2016 23:19:38 GMT
Yes, I'd guess the top figures are BEF. They don't look my US figures (the bottom ones do). And the other pieces are for a mine layer. You need a plastic Steam Tank for the rest of it. I have the steam tank bodies in spades... I just need to figure out what all these little metal rails are for that came in the bags with the tanks....
|
|
|
Help!!
Nov 8, 2016 0:01:57 GMT
Post by farkongnome on Nov 8, 2016 0:01:57 GMT
Ok, got a few more questions: I'm guessing that the skeletons and what looks like a bucket are for the Red Martian. Is there any real difference between a red martian and an assault tripod physically? The stuff on the top of the photo I'm trying to figure out.... these are the martians I got in the lot: Assault Tripod Downed Tripod Drones Flying Drones Grenadier Tripod Martian Power Node Red Martian Scout Tripod Scout Tripod w/Targeter Slave Driver Zombie Troops What would those pieces go to? Is this something for the slave driver? Thanks!!
|
|
|
Post by tenchuu on Nov 8, 2016 0:22:58 GMT
Physically the same except the dazzler (the bucket) and the siren (cone shape) and the skeletons. The bits above are legs for a slaver or a lobber.
|
|
|
Post by scottwashburn on Nov 8, 2016 1:55:19 GMT
Well, the finished mine layer looks like this:
|
|
|
Post by loyalist on Nov 8, 2016 2:18:12 GMT
I didn't see the infantry photos you asked about on this forum but saw them on FB. The top figures are BEF and the bottom are US infantry.
|
|
|
Post by farkongnome on Nov 8, 2016 12:43:10 GMT
scottwashburn -- can you take a top down shot of the mine layer? I think I'm going to be creating step by step instructions for all the things I need to put together since very little exists for new people. Thanks everyone for the help so far! more to come as I sort through all the stuff!!
|
|
|
Post by tenchuu on Nov 8, 2016 15:31:34 GMT
Well, the finished mine layer looks like this: Absolutely looks like one of the mines is on fire from that angle.
|
|
|
Help!!
Nov 8, 2016 17:43:10 GMT
Post by farkongnome on Nov 8, 2016 17:43:10 GMT
^^ Agreed
|
|
|
Help!!
Nov 29, 2016 15:49:59 GMT
Post by madmorgan on Nov 29, 2016 15:49:59 GMT
Looks like you got a lot of stuff! Bravo.
|
|