|
|
Post by tomg on May 10, 2016 17:29:38 GMT
Has anyone found any good carrying cases for the tripods? Especially something that would have foam to protect them?
|
|
|
|
Post by terrance on May 10, 2016 17:55:10 GMT
On the old forum I posted some pictures of the U-Haul Glass and China moving boxes I use. The Tripods fit nicely into the cardboard grid for holding glasses. No foam protection, but there is not too much room to rattle around. When I get home I'll see if I still have the pictures and will repost them here.
|
|
|
|
Post by terrance on May 11, 2016 2:17:15 GMT
Here is my storage solution. The box is a Dish saver Glass box from U-Haul. I take pluck foam inserts and cut them shorter to fit the width of the box. The white box is from Fuzz Box.  |
|
|
|
Post by terrance on May 11, 2016 2:18:10 GMT
The Fuzz Box solution works well for infantry, rough riders etc and some drones.  |
|
|
|
Post by terrance on May 11, 2016 2:20:32 GMT
I cut down the grid used to store glasses to the height of the tripods to allow use of the top of the box for Fuzz Boxes and pluck foam. The tripods fit nicely into the grid cells. I taped the grid together for stability and added a bottom to the grid so the tripod bases do not get caught under the cardboard walls. 
I am actually looking for a different solution for the grenadiers, slavers, etc. since they are so much shorter. They will fit standing in a 4 inch tall pluck foam tray, but I think I can only get 4 to a tray. Need to do some more prototyping. But 4 per tray may work out all right. I am also now putting these tripods on 3 inch diameter bases from Litko. |
|
|
|
Post by madmorgan on May 25, 2016 10:37:52 GMT
TY for reposting these pics - I really like these alot!!
|
|
