|
Post by madmorgan on Mar 22, 2016 11:03:55 GMT
Hi, was poking about Amazon the other day ordering another of scotts book for a friend and notice that Amazon has a line of 3D printed, unpainted terrain. Apparently they bought a lot from Ender Toys - this are the Seus Corp Ltd terrain all with a nice price point and size. I'll list a few of the line here - they all come with their measurements allowing you to decide if they'd work for you. All have a $2.99 shipping/handling fee.
Tank Barricades 25x25x40mm tall with six points $3.99 - I intend to use these for martian 'dragon teeth' fixed positions.
Bridge 200x80x23mm tall $6.99 lays flat on the table (no arc). Works well for 'frozen' water rivers.
Crates & Barrels 26x26x26mm & 21x21x26mm $4.99 - can never have enough variety of these.
Brick Walls (2) $5.99 Large: 110x75x40mm tall; Small: 90x65x20mm tall - obiviously the small is more useful, but both will work.
Turret 85x85x60mm tall $4.99 - this is Not a turret, more a tall structure with flat roof and four fortified positions at each corner. The ladder up the side is indented concrete with footing 10mm apart, a reasonable look for our 18mm figures. But, I must say I'm disappointed with this and its companion 'Star Turret' as neither are turrets in any sense of the word. The sides don't even have any firing slits so its just a building in my book. Probably use as a command position if I even bother.
Bunker 160x160x50mm tall (hexagon), this is a true bunker and would be good for a large protected ATguns position. The size would allow several to fit inside (top comes off) and its shape give you good firing options all around. Armor 10 is nothing to sneeze at & I'd cost it out as a Turret or perhaps as a turret & barbette (as thats how you'd do the guns inside I'd think).
For all these and more go to Amazon.com and search for Seus Corp Ltd for the line - Enjoy!
|
|