|
|
Post by greenbeanie on Dec 10, 2017 13:58:42 GMT
No one has heard any thing from Iron Clad Games concerning the release of the Martian Construction Machine, so I was wondering what you folks are using for this machine?
|
|
|
|
Post by Quendil on Dec 10, 2017 15:12:53 GMT
|
|
|
|
Post by loyalist on Dec 10, 2017 15:29:31 GMT
I used Scout models, reducing the leg height by 1 section and adding the manipulator arm and claw from the power node model. See photos of the primed model in Construction Engine Conversion, page 4 of the WIP section.
|
|
|
|
Post by terrance on Dec 11, 2017 4:23:26 GMT
I used the Black Hat machines. I posted pics on the forum. Hum. Cannot figure out how to add a link. Go to Work in Progress, thread Black Hat Miniatures conversion to constructor engine.
|
|
|
|
Post by Quendil on Dec 11, 2017 9:09:59 GMT
|
|
|
|
Post by Quendil on Dec 11, 2017 9:11:38 GMT
|
|
|
|
Post by mikedski on Dec 11, 2017 9:59:09 GMT
Like Loyalist, I did a combination. I took a slaver and added the power node claw and arms.  |
|
|
|
Post by hardlec on Dec 11, 2017 13:20:07 GMT
I really like the slavery modification. I'd buy a couple if IG would sell them.
|
|
|
|
Post by mikedski on Dec 11, 2017 18:41:47 GMT
I developed mine more as a mobile repair unit.
I think the grenadier without the launchers would a good alternative chassis as a no combat machine.
|
|
|
|
Post by loyalist on Dec 12, 2017 23:23:59 GMT
I really like the slavery modification. I'd buy a couple if IG would sell them. I thought IG was making them. |
|
