|
Post by hardlec on Feb 4, 2017 19:53:50 GMT
I am having an issue building my Royal Scientist.
It seems I have 4 arms and only three places to put them.
I also have a small round (.125 inch diameter) thing that looks vaguely like a hatch cover with a small wheel as a handle.
I can't seem to find a picture that showes the location of the light saber....
|
|
|
Post by Quendil on Feb 4, 2017 21:52:56 GMT
I think there is a picture in one of my threads, I put the heat gun on the side
|
|
|
Post by loyalist on Feb 4, 2017 22:42:39 GMT
My kit didn't have the hatch cover with small wheel. I drilled a hole in the underside of the part that holds the tentacles and heat ray and put the heat saw underneath.
For the heat saw I bought a pair of 4" long rods from the Conqueror heat ray fence and used one for the heat saw 'blade', inserting it in a new hole drilled at the end of the arm so it projects in line with the arm instead of upwards. The Conqueror parts are the same material as the short piece of translucent red plastic supplied with the Royal Scientist kit. With a 4" length and the arm mounted on the underside of the head I was able to cut the 'blade' where it met the ground so it doesn't stop in mid-air as in the original part. Looks much better to me.
|
|