|
Post by slave2gaming on Nov 22, 2017 0:42:21 GMT
G’day once again from the Slave Dungeon, This week at Slave 2 Gaming we see the release of our Dark World War Resin Terrain range, designed specifically for the alternate reality of the Dark World War. So, what makes our scenery any different than any other scenery? We decided that the Dark World War needs to be as the name says “Dark.” So, most of our scenery contains bodies of the fallen! Fun for all the kiddies! The initial release see’s four pieces of terrain being released. The first piece is our Barbed wire fence sets. Each pack contains 2 resin bases, the poles and the wire to create two complete fences. The second piece of terrain is the first of the ruined trench line. The ruined trench is a single piece casting. This includes a single dead British soldier, partially covered by dirt. The next two pieces of terrain in the Dark World War range are our Craters. One being the 5” diameter, resin cast, multiple crater piece, with a single fallen Prussian soldier. The second being the double crater, which also contains 2 fallen Prussian soldiers. The last piece of scenery is the Wooden Tank traps. These are metal cast and are sold in packs of 3. There is more scenery planned for the Dark World War, including duck boarded craters and such, but release will most likely be based on how this release of terrain works. The scenery can be found here at www.slave2gaming.comIf you have any questions, email us at slavemaster@slave2gaming.com
|
|
|
Post by Quendil on Nov 22, 2017 9:22:48 GMT
Great stuff
|
|
|
Post by madmorgan on Nov 22, 2017 13:27:16 GMT
Good stuff as usual - all that is missing in the write up is the Length & Width on the barbed wire and trench pieces. Please include those as it determines how many I'll need. My only other comment is the inclusion of the 'dead' figures on the casting as it kinda locks in the utility of the piece - I might not want Germans on that piece for whatever reason.
|
|
|
Post by slave2gaming on Nov 22, 2017 21:46:05 GMT
Good stuff as usual - all that is missing in the write up is the Length & Width on the barbed wire and trench pieces. Please include those as it determines how many I'll need. My only other comment is the inclusion of the 'dead' figures on the casting as it kinda locks in the utility of the piece - I might not want Germans on that piece for whatever reason. Ok, the length of the Barbed wire pieces is 120mm x 40mm, and the ruined trench piece is 130mm x 65mm (at its widest). The large crater is roughly 115mm, while the smaller double crater is 120mm x 80mm (at its widest), Good point about the dead on the scenery, Mike and I had this discussion about them when we made them (he wanted more dead on the scenery). Personally, my thoughts are that if you are concerned, they could still be painted with the normal ground colour that you plan to use and they wouldn't stand out,, maybe even put some static grass on them and they will disappear.
|
|
|
Post by hardlec on Dec 3, 2017 14:31:34 GMT
Some people like bodies, some don't. I don't. That said I would still like some of this on my table.
|
|
|
Post by madmorgan on Feb 12, 2018 19:49:37 GMT
A very reasonable solution - I like the 'grass over'. Maybe even some red weed over action
|
|