|
Post by David N.Tanner 07011959 on Apr 6, 2023 19:39:54 GMT
So far it's holding up pretty well. The amazing thing is it was printed without supports. The middle one, the Jeff wayne model, is proving to be the most fragile. I've already had to repair it.
|
|
|
Post by David N.Tanner 07011959 on Mar 31, 2023 13:33:03 GMT
I like #3 too but I have to admit I have a soft spot for #2. I used to play the computer game of Jeff Wayne's War of the Worlds. J, I have plenty of left over sprues of weapons and I found a nice file on Thingiverse that is just Martian weapons, so I'm good.
|
|
|
Post by David N.Tanner 07011959 on Mar 30, 2023 18:43:53 GMT
Three different tripods I found on Thingiverse. I think I've finally gotten the hang of the Ender 3
|
|
|
Post by David N.Tanner 07011959 on Jan 5, 2023 15:23:08 GMT
It's the "bed-leveling" that drives me insane. Does a small builders square work? says the man that knows nothing about it! I wish. My printer is about 5 years old now and I believe there is a warp in the bed. The best tool I've found is a piece of typing paper used as a feeler gauge as I manually adjust the four corners of the bed. Sorry, that's probably a lot more than you wanted to know.
|
|
|
Post by David N.Tanner 07011959 on Jan 4, 2023 14:23:55 GMT
It's the "bed-leveling" that drives me insane.
|
|
|
Post by David N.Tanner 07011959 on Dec 30, 2022 14:22:21 GMT
I spent the year fighting my 3D printer. We decided to call it a draw.
|
|
|
Post by David N.Tanner 07011959 on Dec 25, 2022 17:35:26 GMT
A very happy Christmas to all
|
|
|
Post by David N.Tanner 07011959 on Dec 23, 2022 14:09:46 GMT
Happy Christmas eveyone!
|
|
|
Post by David N.Tanner 07011959 on Dec 11, 2022 15:29:07 GMT
|
|
|
Post by David N.Tanner 07011959 on Nov 21, 2022 22:28:58 GMT
Sad but true
|
|
|
Post by David N.Tanner 07011959 on Nov 15, 2022 14:19:38 GMT
|
|
|
Post by David N.Tanner 07011959 on Sept 7, 2022 14:02:44 GMT
Are there pictures of the Experimental Vehicles?
|
|
|
Post by David N.Tanner 07011959 on Jul 8, 2022 13:36:33 GMT
Good Luck! My printer had betrayed me and refuses to print anything lately.
|
|
|
Post by David N.Tanner 07011959 on Jun 27, 2022 19:55:55 GMT
OMG Robot Chickens
|
|
|
Post by David N.Tanner 07011959 on May 16, 2022 13:24:17 GMT
Very Good!
|
|